Three-phase electric motor: H17R-315-2 200KW 6000V 50HZ
| Basic technical data | |
| Motor type | H17R 315-2 |
| Rated power (kW) | 200 |
| Frame size (mm) | 315 |
| Number of poles | 2 |
| Rated speed (rpm) | 2973 |
| Frequency (Hz) | 50 |
| Electrical parameters | |
| Rated voltage (V) | 6 000 |
| Connection | Y |
| Rated current (A) | 24,3 |
| Efficiency at 100% load (%) | 94,3 |
| Power factor at 100% load | 0,84 |
| Starting and torque characteristics | |
| Rated torque (Nm) | 642,4 |
| Locked-rotor torque ratio (LRT/RLT) | 0,61 |
| Breakdown torque ratio (BDT/RLT) | 2,9 |
| Locked-rotor current ratio (LRA/RLA) | 6,2 |
| Rotor moment of inertia (kg·m²) | 2,1 |
| Accessories | |
| 6 x PT100 in winding | |
| 1 x PT100 in NDE bearing | |
| 1 x PT100 in DE bearing | |
| Anti-condensation heater 230 V | |
| 3 x PTC thermistor | |
| Applicable standards | |
| Specification | IEC60034-1 |
| Testing | IEC60034-2 |
| Noise | IEC60034-9 |
| Vibration | IEC60034-14 |
| Construction and operating data | |
| Mounting arrangement | IM B3 (other designs on request) |
| Duty type | S1 |
| Load type | Parabolic or linear curve |
| Degree of protection | IP55 |
| Insulation class | F |
| Temperature rise class | B |
| Cooling method | IC411 |
| Starting method | DOL, VFD, Soft-starter |
| Direction of rotation | Both |
| Vibration (mm/s) | 2.8 |
| Rotor cage | copper bar |
| Terminal box type | VYBO CB1-HV |
| Operating conditions | |
| Ambient temperature range (°C) | -20 to +40 (-30, +50, +60 optional) |
| Maximum installation altitude | up to 1000 m |
| Weight and surface finish | |
| Approximate weight | 1800 kg |
| Colour | RAL7030 |
| Paint finish | shiny |
| Bearings and lubrication | |
| DE/NDE bearings | 6218-C3/6218-C3 |
| Lubricant | Li based, no.2 class |
H17R-315-B-2-6 delivers 200 kW in a compact design that can provide high power density in industrial practice without unnecessary space requirements. This 2900 rpm electric motor is intended for applications where smooth starting, stable torque transmission and reliable operation at a 6 kV mains voltage are decisive. In a category where every metre of the assembly and every shutdown matters, the 6000 V electric motor gives designers and operators confidence under long-term load.
2900 rpm electric motor for drives that need operating reserve
The rated speed of 2973 rpm supports operation in which the 2900 rpm electric motor remains in a range suitable for pumps, compressors and conveying technologies. For medium-sized companies as well as large factories, it is important that this is a three-phase electric motor with predictable behaviour in continuous service and parameters that make drive design easier as early as the project stage. In practice, this means fewer compromises when sizing the drive train and better control over operating losses.
315 mm frame and copper rotor for long service life
The 315 mm shaft height helps fit this model into assemblies where output is required without an unnecessarily bulky design. Copper strip in the rotor cage reduces losses while supporting thermal resistance in demanding operation, which is reflected in reliability and service intervals during long production cycles. The 6000 V electric motor thus gains properties valued by engineers when designing modern 6 kV industrial drives, especially where stable operation under load is expected.
Durability for demanding environments and maintenance practice
For operations with higher levels of dust, moisture or process contamination, special protection that can be adapted to the requirements of the specific installation is also important. The solution is suitable where the motor operates close to an aggressive process environment and where the enclosure is expected to provide protection without unnecessarily restricting service access. In this class, it is particularly effective on continuous lines where every outage increases production costs.
The design with insulation class F and temperature rise B helps keep operation within a sensible thermal range even under prolonged load. A weight of 1800 kg, rotor moment of inertia of 2,100 kg·m² and 6218-C3 bearings on both the DE and NDE sides underline that this is a solution designed for stability and precise mechanical coupling in high-power applications. For machines of this type, VYBO Electric builds on years of experience supplying industrial systems where service readiness and the availability of additional measurements in the winding and bearings are also decisive.
Use in technologies with continuous load
In operations where reliable running is required throughout long shifts, this model can be used in both typical and specialised technologies. The design is suitable for multiple sectors of raw-material processing, energy and water management.
- Main circulation pumps in chemical production.
- Process compressors for industrial compressed air.
- Long belt conveyors in quarries and mining.
- Mills for crushing mineral raw materials.
- Ventilation units for process halls.
- Pumping stations for utility and cooling water.
- Extruders in plastics processing.
- Auxiliary rolling drives in metallurgical lines.
- Mixing equipment in the production of construction mixtures.
If you need a motor for a demanding assembly where output, space and service reliability all matter, contact us.