Three-phase electric motor: H27R-5003-2 1800KW 6000V 50HZ
| Basic technical data | |
| Motor type | H27R 5003-2 |
| Rated power (kW) | 1800 |
| Frame size (mm) | 500 |
| Number of poles | 2 |
| Rated speed (rpm) | 2988 |
| Frequency (Hz) | 50 |
| Electrical parameters | |
| Rated voltage (V) | 6000 |
| Connection | Y |
| Rated current (A) | 196,6 |
| Efficiency at 100% load (%) | 97,1 |
| Power factor at 100% load | 0,91 |
| Starting and torque characteristics | |
| Rated torque (Nm) | 5753 |
| Locked-rotor torque ratio (LRT/RLT) | 0,60 |
| Breakdown torque ratio (BDT/RLT) | 2,9 |
| Locked-rotor current ratio (LRA/RLA) | 6,8 |
| Rotor moment of inertia (kg·m²) | 25,8 |
| Load moment of inertia (kg·m²) | 119 |
| Accessories | |
| 6 x PT100 in windings | |
| 1 x PT100 in NDE bearing | |
| 1 x PT100 in DE bearing | |
| Anti-condensation heater 230 V | |
| 3 x PTC thermistor | |
| Applicable standards | |
| Specification | IEC60034-1 |
| Testing | IEC60034-2 |
| Noise | IEC60034-9 |
| Vibration | IEC60034-14 |
| Construction and operating data | |
| Mounting arrangement | IM B3 (other designs on request) |
| Duty type | S1 (S2, S3, S4 – S9 optional) |
| Load type | Parabolic or linear curve |
| Degree of protection | IP55 |
| Insulation class | F |
| Temperature rise class | B |
| Cooling method | IC611 (On request IC616, IC666) |
| Starting method | DOL, VFD, Soft-starter |
| Direction of rotation | Both |
| Vibration (mm/s) | 2.8 |
| Rotor cage | copper rotor bars |
| Terminal box type | VYBO CB1-HV |
| Operating conditions | |
| Ambient temperature range (°C) | -20 to +40 (-30, +50, +60 optional) |
| Maximum installation altitude | up to 1000 m |
| Weight and surface finish | |
| Approximate weight | 5650 kg |
| Colour | RAL7030 |
| Paint finish | shiny |
| Bearings and lubrication | |
| DE/NDE bearings | On request/On request |
| Lubricant | Lithium-based grease No. 2 (temperature class) |
The H27R-HD-Modular series is designed for large drives where both long-term reliability and energy consumption are decisive. The H27R 5003-2-6 model with an output of 1800 kW provides reserve for continuous operation and, thanks to high efficiency, reduces operating losses in demanding processes. It is a three-phase electric motor prepared for stable operation in power generation, raw-material processing and heavy industry.
2900 rpm electric motor for high loads with lower losses
A rated speed of 2988 rpm and rated torque of 5753 Nm support drives that need rapid response and smooth power transmission. Rated current of 196,6 A, a power factor of 0,91 and efficiency of 97,1 % provide scope for better energy efficiency under long-term loading. This 2-pole electric motor is suitable wherever high dynamics without unnecessary losses are expected from the motor.
Welded steel frame simplifies handling in heavy-duty operation
The 500 mm frame size is built on a welded steel structure that helps maintain rigidity at high output while simplifying transport and installation of the motor into the technological system. Insulation class F and temperature rise B support a safe thermal regime during stable deployment. In practice, this provides a reliable basis for drives where there is no room for unplanned downtime.
Starting and protection are prepared for demanding start-up
Starting parameters help design the power supply and protection for heavier starts where torque reserve is important. Starting torque reaches 0,6 times the rated torque, breakdown torque 2,9 times the rated torque and starting current 6,8 times the rated current. When designing the switchboard, protection and starting circuits, it is therefore advisable to allow reserve for short-term loading and suitable monitoring of winding and bearing temperatures.
Typical deployment in industrial lines
- Drive for large pumps in water management and power-generation units.
- Drive for compressors supplying compressed process air in chemical production.
- Drive for fans and blowers in combustion and extraction systems.
- Drive for agitators in metallurgical and technological tanks.
- Drive for conveyor lines in the mining and processing industries.
- Drive for rolling and winding units in high-load production.
- Drive for crushers and mills in bulk-material processing operations.
Bearing monitoring and heating reduce the risk of downtime
Standard thermal protection and monitoring help track the condition of the motor in real operation, which is especially valuable for a three-phase drive in environments with fluctuating load and temperature. Both DE and NDE bearings are available on request, simplifying maintenance design for a specific project. For higher power-supply requirements, operation at 6000 V is also considered so that the motor can be safely integrated into the technology without compromising operating availability.
A solution for large operations focused on return on investment
H27R 5003-2-6 with a package weight of 5650 kg, rotor inertia of 25,8 kg·m² and load inertia of 119,0 kg·m² is suitable for projects where long-term stability, economy and service predictability are monitored. VYBO Electric supplies a solution for industrial systems that need a reliable high-power motor with a clear benefit for operating costs. Contact us for technical documentation, configuration recommendations and a fast quotation.